Editing 80-series (section)

=New 80 Series Features=
Select inputs/outputs can be configured as status light outputs and override inputs<br>
*When an alternative override input is used it is only used for Anti Car-Jacking and emergency override, the button on the antenna is still used for programming and other features (pit-stop, low volt/temp AutoStart activation, etc,.)
*Resistors may be needed for any LED not designed to operate at 12V
Select inputs can be configured as Arm or Disarm inputs<br>
Select inputs can be configured as analog Wait-to-Start<br>
Select inputs can be configured as N/C inputs for Hood, Door, or Trunk zones<br>
M/T mode can be programmed to activate when parking brake is set, no need to activate via remote/RS process<br>
New antennas will work as RF kit for RS-80-G0<br>
70-series remotes and antennas are '''NOT''' compatible with 80-series<br>
Remotes now transmit upon button release OR after button is held for 2 seconds<br>