Editing 80-series (section)

=New 80 Series Feature Programming=
'''New Programmable Feature Menus'''<br>
Features are now broken into 6 Banks <br>
*'''1. RS Options''' <br>
*'''2. Convenience Options''' <br>
*'''3. Security Options''' <br>
*'''4. System Behaviors''' <br>
*'''5. Output Config''' <br>
*'''6. Input Config''' <br>
Feature programming now uses prog button and brake to select banks, feature, and options.<br>
#Enter programming with Ignition On/Off and prog button 5x<br>
##System will confirm, with 2 chirps<br>
##Ignition back On '''IF''' brake requires ignition On for operation<br>
#Use prog button to select desired feature bank<br>
##System will respond with chirps to correspond to selected bank number<br>
##Chirps will repeat after ~2 seconds delay<br>
#Press brake to confirm selection<br>
##System will respond with 1x chirp<br>
#Use prog button to select desired feature<br>
##System will respond with chirps to correspond to selected feature number<br>
##Chirps will repeat after ~2 seconds delay<br>
#Press brake to confirm selection<br>
##System will respond with chirps to indicate current option setting of selected feature<br>
#Use prog button to select desired option within feature<br>
##System will respond with chirps to correspond to selected option<br>
#Press brake to confirm selection<br>
##System will respond with 1x chirp and return to feature selection in current bank<br>
##Pressing Brake again will go back to the bank selection option<br>
#Turn Ignition On/Off or wait to exit programming<br>
<br>
'''Feature Reset''' - Enter programming (ignition on/off, prog button 5x). After long siren chirp/horn honk press and hold the Brake Pedal for >2 seconds. The system will chirp once and exit programming with all features set to OEM defaults.<br>
Some Features only have one option by design, mostly for the input/output wires. This will maintain the menu structure if any future options are added to these wires<br>
'''1514 Reset''' - Power remote down (Hold "P" & Start). Power remote up by holding "P" and Unlock to clear remote 2-way codes and reset clock and all settings<br>