Editing Linkr-MBT (section)

==2.2 - Devices==
'''1.''' Lists all devices registered in the system<br>
:'''a.''' UUID - Device serial number based off of Bluetooth ID number<br>
:'''b.''' Owner - Email address of registered owner, if one exists<br>
:'''c.''' Authorized User - Email address of any used authorized by the owner to use the device<br>
:'''d.''' Device Status - Shows current status (enabled/Disabled) of device. Gives admin ability to Disable/Transfer/Replace devices<br>
'''2.''' Click on UUID field to get further details on device status and settings<br>
:'''a.''' Click any field (BLE Firmware/RS Product/RS Firmware/Owner/Auth User) to go to Firmware/Product/User page<br>
:'''b.''' Check box to enable/disable AUX functions. You must save after selecting and user MUST back out to home screen for settings to take effect<br>
:'''c.''' Click Disable/Enable, Save, Transfer, Replace, or Add Auth User to do the listed function.<br>
:'''d.''' Scroll thru features to see last known RS configuration. (Blue = Default / Red = Current selected option if not Default) <br>
'''3.''' Click on Owner or Authorized User field to go to user settings (See 2.3 Users)<br>
'''4.''' Click on Device enabled/disabled button to go to device settings (See 2)<br>
'''5.''' Click on Disable button to disable device<br>
'''6.''' Click on Transfer button to transfer the device to another registered user.<br>
:'''a.''' User must already be registered in the system before transfer is possible.<br>
'''7.''' Click on Replace button to replace the old device with a different one.<br>
:'''a.''' Be sure the device you select is not already registered to another user.<br>