Editing 80-series (section)

=New Remotes=
'''119-03''' - One button 1-way in carryover case from 70-seroes<br>
*New xASK logo replaces x433<br>
*CR-2032 battery<br>
'''1420-03''' - Four button 1-way with new case design<br>
*New xASK logo replaces x433<br>
*Plastic case with metal trim ring<br>
*Snap together case, no screws<br>
*CR-2032 battery<br>
'''1423-03''' - Four button 1-way in carryover all plastic case from 70-seroes<br>
*New xASK logo replaces x433<br>
*Snap together case, no screws<br>
*CR-2032 battery<br>
'''1514-03''' - Five button 2-way with new case and screen layout<br>
*To turn On - Hold Start for ~5 seconds<br>
*To turn Off - Hold "P" & Start for ~5 seconds<br>
*New xASK logo replaces x433<br>
*USB-C charge port<br>
*USB-C firmware update capability<br>
** Hold Trunk while connecting USB connected to Nutek site.<br>

==Good to know stuff/DEV notes==
Antenna LED operation is 100% data driven, some LED sequences like ATV will continue until the count is completed no mater what the ignition status is<br>
Programmable analog LED outputs and antenna LED timing will not be 100% synced.<br>
Hood no longer acts as Door for MT mode, all system have dedicated door trigger<br>
Fortin EVO's are not officially supported, BUT 1-way IVU will program to Fortin. 2-way will not program due to required "enter programming" data message not being sent by EVO at this time<br>