80-series - Revision history

70.228.96.105: /* New 80 Series Firmware */

2026-05-26T17:20:23Z

New 80 Series Firmware

← Older revision		Revision as of 13:20, 26 May 2026
Line 81:		Line 81:
	*Rearrange Bank 5 feature order.<br>		*Rearrange Bank 5 feature order.<br>
	*Add option for Brown siren wire to be Start Interrupt.<br>		*Add option for Brown siren wire to be Start Interrupt.<br>
			*Fix Nutek bootloader (MBT firmware update) to prevent unit lockup if BT connection lost during update (must use Weblink to update this on older units) <br>
	V1.2 Release 5/26-2026<br>		V1.2 Release 5/26-2026<br>
	*Initial Release for all Blade compatible units.<br>		*Initial Release for all Blade compatible units.<br>
	*Add 15 seconds delay option for ignition override.<br>		*Add 15 seconds delay option for ignition override.<br>
	*Fix Nutek bootloader (MBT firmware update) to prevent unit lockup if BT connection lost during update (must use Weblink to update this on older units) <br>
	*Low battery warning on 2-way will follow low volt autostart setting. Set to 11.5 when low volt option set to Off.<br>		*Low battery warning on 2-way will follow low volt autostart setting. Set to 11.5 when low volt option set to Off.<br>
	*Unit will flash parking lights once upon every unlock press when disarmed/unlocked for remote operation visual confirmation. <br>		*Unit will flash parking lights once upon every unlock press when disarmed/unlocked for remote operation visual confirmation. <br>

70.228.96.105: /* New 80 Series Firmware */

2026-05-26T17:19:13Z

New 80 Series Firmware

← Older revision		Revision as of 13:19, 26 May 2026
Line 81:		Line 81:
	*Rearrange Bank 5 feature order.<br>		*Rearrange Bank 5 feature order.<br>
	*Add option for Brown siren wire to be Start Interrupt.<br>		*Add option for Brown siren wire to be Start Interrupt.<br>
	V1.2 Release 5/?-2026<br>		V1.2 Release 5/26-2026<br>
	*Initial Release for all Blade compatible units.<br>		*Initial Release for all Blade compatible units.<br>
	*Add 15 seconds delay option for ignition override.<br>		*Add 15 seconds delay option for ignition override.<br>

70.228.96.105: /* New Antennas */

2026-05-05T15:46:57Z

New Antennas

← Older revision		Revision as of 11:46, 5 May 2026
Line 159:		Line 159:
	- The module will return to step 02.<br>		- The module will return to step 02.<br>
	TO EXIT: Hold the button for 5 seconds or wait 30 seconds.<br>		TO EXIT: Hold the button for 5 seconds or wait 30 seconds.<br>
			<br>
			REC-2NxA Full Reset:<br>
			Step 1: Unplug the harness from the antenna module.<br>
			Step 2: Hold the programming button. <br>
			Step 3: Plug in the harness to the antenna module. <br>
			Step 4: Continue holding the programming button for 5 seconds. Release when the status LED turns on solid for 1 second. <br>
			The module is now reset to default feature settings.<br>

70.228.96.105: /* New Antennas */

2026-05-05T15:44:45Z

New Antennas

← Older revision		Revision as of 11:44, 5 May 2026
Line 141:		Line 141:
	**Built in tilt sensor<br>		**Built in tilt sensor<br>
	<br>		<br>
	*Tilt sensor programming:<br>		Tilt sensor programming:<br>
	** Tilt sensor is Off by deafault<br>		-Tilt sensor is Off by deafault<br>
	Step 1: Hold the programming button for 5 seconds.		Step 1: Hold the programming button for 5 seconds.<br>
	- At 2 seconds, the system will enter valet mode.		- At 2 seconds, the system will enter valet mode.<br>
	- After 5 seconds, the status LED will flash rapidly, release the		- After 5 seconds, the status LED will flash rapidly, release the button. The system will exit valet mode and stay in tilt/feature programming mode.<br>
	button. The system will exit valet mode and stay in tilt/feature		Step 2: Tap the programming button equal to the desired feature number:<br>
	programming mode.		Feature #1: Tilt trigger sensitivity<br>
	Step 2: Tap the programming button equal to the desired		- The status LED will flash equal to the selection, pause then repeat.<br>
	feature number:		Step 3: Tap the programming button equal to the desiredfeature number:<br>
	Feature #1: Tilt trigger sensitivity		1 = OFF, 2 = 1 Degrees, 3 = 2 Degrees, 4 = 3 Degrees 5= 4 degrees<br>
	- The status LED will flash equal to the selection, pause then		- The status LED will flash equal to the selection, pause then repeat.<br>
	repeat.		Step 4: Tap the START button on the remote to confirm.<br>
	Step 3: Tap the programming button equal to the ~~desired~~		- The status LED will turn on for 1 second to confirm.<br>
	~~feature~~ number:		- The status LED will flash to indicate the current feature setting, pause, then repeat.<br>
	1 = OFF, 2 = 1 Degrees, 3 = 2 Degrees, 4 = 3 Degrees 5= 4 degrees		Step 5: Tap the START button on the remote to confirm.<br>
	- The status LED will flash equal to the selection, pause then		- The status LED will turn on for 1 second to confirm.<br>
	repeat.		- The module will return to step 02.<br>
	Step 4: Tap the START button on the remote to confirm.		TO EXIT: Hold the button for 5 seconds or wait 30 seconds.<br>
	- The status LED will turn on for 1 second to confirm.
	- The status LED will flash to indicate the current feature
	setting, pause, then repeat.
	Step 5: Tap the START button on the remote to confirm.
	- The status LED will turn on for 1 second to confirm.
	- The module will return to step 02.
	TO EXIT: Hold the button for 5 seconds or wait 30 seconds.

70.228.96.105: /* New Antennas */

2026-05-05T15:42:50Z

New Antennas

← Older revision		Revision as of 11:42, 5 May 2026
Line 140:		Line 140:
	**Marked with TILT 3D, ECHO & xSST logo<br>		**Marked with TILT 3D, ECHO & xSST logo<br>
	**Built in tilt sensor<br>		**Built in tilt sensor<br>
			<br>
			*Tilt sensor programming:<br>
			** Tilt sensor is Off by deafault<br>
			Step 1: Hold the programming button for 5 seconds.
			- At 2 seconds, the system will enter valet mode.
			- After 5 seconds, the status LED will flash rapidly, release the
			button. The system will exit valet mode and stay in tilt/feature
			programming mode.
			Step 2: Tap the programming button equal to the desired
			feature number:
			Feature #1: Tilt trigger sensitivity
			- The status LED will flash equal to the selection, pause then
			repeat.
			Step 3: Tap the programming button equal to the desired
			feature number:
			1 = OFF, 2 = 1 Degrees, 3 = 2 Degrees, 4 = 3 Degrees 5= 4 degrees
			- The status LED will flash equal to the selection, pause then
			repeat.
			Step 4: Tap the START button on the remote to confirm.
			- The status LED will turn on for 1 second to confirm.
			- The status LED will flash to indicate the current feature
			setting, pause, then repeat.
			Step 5: Tap the START button on the remote to confirm.
			- The status LED will turn on for 1 second to confirm.
			- The module will return to step 02.
			TO EXIT: Hold the button for 5 seconds or wait 30 seconds.

70.228.96.105: /* New 80 Series Hardware */

2026-04-28T20:06:29Z

New 80 Series Hardware

70.228.96.105: /* New 80 Series Feature Programming */

2026-04-28T19:39:58Z

New 80 Series Feature Programming

← Older revision		Revision as of 15:39, 28 April 2026
Line 41:		Line 41:
	##Pressing Brake again will go back to the bank selection option<br>		##Pressing Brake again will go back to the bank selection option<br>
	#Turn Ignition On/Off or wait to exit programming<br>		#Turn Ignition On/Off or wait to exit programming<br>
			<br>
			Some Features only have one option by design, mostly for the input/output wires. This will maintain the menu structure if any future options are added to these wires<br>
	<br>		<br>
	'''Feature Reset''' - Enter programming (ignition on/off, prog button 5x). After long siren chirp/horn honk press and hold the Brake Pedal for >2 seconds. The system will chirp once and exit programming with all features set to OEM defaults.<br>		'''Feature Reset''' - Enter programming (ignition on/off, prog button 5x). After long siren chirp/horn honk press and hold the Brake Pedal for >2 seconds. The system will chirp once and exit programming with all features set to OEM defaults.<br>
	*Once in bank or feature selection holding brake doe 3 seconds will return to Bank selection menu.<br>		*Once in bank or feature selection holding brake doe 3 seconds will return to Bank selection menu.<br>
	~~Some Features only have one option by design, mostly for the input/output wires. This will maintain the menu structure if any future options are added to these wires~~<br>		<br>
	'''1514 Reset''' - Power remote down (Hold "P" & Start). Power remote up by holding "P" and Unlock to clear remote 2-way codes and reset clock and all settings<br>		'''1514 Reset''' - Power remote down (Hold "P" & Start). Power remote up by holding "P" and Unlock to clear remote 2-way codes and reset clock and all settings<br>

70.228.96.105: /* New 80 Series Feature Programming */

2026-04-28T19:39:16Z

New 80 Series Feature Programming

← Older revision		Revision as of 15:39, 28 April 2026
Line 43:		Line 43:
	<br>		<br>
	'''Feature Reset''' - Enter programming (ignition on/off, prog button 5x). After long siren chirp/horn honk press and hold the Brake Pedal for >2 seconds. The system will chirp once and exit programming with all features set to OEM defaults.<br>		'''Feature Reset''' - Enter programming (ignition on/off, prog button 5x). After long siren chirp/horn honk press and hold the Brake Pedal for >2 seconds. The system will chirp once and exit programming with all features set to OEM defaults.<br>
			*Once in bank or feature selection holding brake doe 3 seconds will return to Bank selection menu.<br>
	Some Features only have one option by design, mostly for the input/output wires. This will maintain the menu structure if any future options are added to these wires<br>		Some Features only have one option by design, mostly for the input/output wires. This will maintain the menu structure if any future options are added to these wires<br>
	'''1514 Reset''' - Power remote down (Hold "P" & Start). Power remote up by holding "P" and Unlock to clear remote 2-way codes and reset clock and all settings<br>		'''1514 Reset''' - Power remote down (Hold "P" & Start). Power remote up by holding "P" and Unlock to clear remote 2-way codes and reset clock and all settings<br>

70.228.96.105: /* New Remotes */

2026-04-28T19:36:52Z

New Remotes

← Older revision		Revision as of 15:36, 28 April 2026
Line 123:		Line 123:
	*USB-C firmware update capability<br>		*USB-C firmware update capability<br>
	** Hold Trunk while connecting USB connected to Nutek site. (not publicly available)<br>		** Hold Trunk while connecting USB connected to Nutek site. (not publicly available)<br>

			=New Antennas=
			*REC-1N4A = 1-Way 433Mhz antenna.<br>
			**Marked with Omega & xASK logo<br>
			*REC-2N4A = 2-Way 433Mhz antenna.<br>
			**Marked with TILT 3D, ECHO & xASK logo<br>
			**Built in tilt sensor<br>
			*REC-1N9A = 1-Way 900Mhz antenna.<br>
			**Marked with Omega & xSST logo<br>
			*REC-2N9A = 2-Way 900Mhz antenna.<br>
			**Marked with TILT 3D, ECHO & xSST logo<br>
			**Built in tilt sensor<br>

70.228.96.105: /* New 80 Series Firmware */

2026-04-28T19:29:08Z

New 80 Series Firmware

← Older revision		Revision as of 15:29, 28 April 2026
Line 76:		Line 76:
	*Rearrange Bank 5 feature order.<br>		*Rearrange Bank 5 feature order.<br>
	*Add option for Brown siren wire to be Start Interrupt.<br>		*Add option for Brown siren wire to be Start Interrupt.<br>
			V1.2 Release 5/?-2026<br>
			*Initial Release for all Blade compatible units.<br>
			*Add 15 seconds delay option for ignition override.<br>
			*Fix Nutek bootloader (MBT firmware update) to prevent unit lockup if BT connection lost during update (must use Weblink to update this on older units) <br>
			*Low battery warning on 2-way will follow low volt autostart setting. Set to 11.5 when low volt option set to Off.<br>
			*Unit will flash parking lights once upon every unlock press when disarmed/unlocked for remote operation visual confirmation. <br>
			*Lt Green/Black & Lt Green/Red wires can not be programmed for Lock, Unlock, or 2nd Unlock. <br>
			*28 seconds option removed from Blue Unlock wire. <br>
			*Blue/White & Green/Black now have Accessory option. <br>

	=New Remotes=		=New Remotes=

← Older revision		Revision as of 16:06, 28 April 2026
Line 56:		Line 56:
	*New 4-pin harness w/ (+/-)P/L, Ground, and Siren<br>		*New 4-pin harness w/ (+/-)P/L, Ground, and Siren<br>
	*New 12-pin harness with 22AWG wires for all inputs and low current outputs<br>		*New 12-pin harness with 22AWG wires for all inputs and low current outputs<br>
	*New antenna port is ~~not~~ 4-pin iData connector on side of module<br>		*New antenna port is now White 4-pin iData style connector on side of module<br>
	*Door lock port, Green & Black data ports, and Red RS output ports are all carryover from 70-series<br>		*Door lock port, Green & Black data ports, and Red RS output ports are all carryover from 70-series<br>
	*Linkr-MBT can can connect to antenna port and support all functions including antenna as passthrough. Black port will also support Linkr-MBT.<br>		*Linkr-MBT can can connect to antenna port and support all functions including antenna as passthrough. Black port will also support Linkr-MBT.<br>
Line 63:		Line 63:
	*Same 6-pin main harness pinout as 70-seroes with adjusted wire gauges<br>		*Same 6-pin main harness pinout as 70-seroes with adjusted wire gauges<br>
	**Red/White is now Red/Black<br>		**Red/White is now Red/Black<br>
	*Includes two analog sensor ports that are now independent zones (1 - White / 1-Yellow)<br>		*Includes two analog sensor ports that are now independent zones (?1 - White / 1-Yellow?)<br>
	*New 4-pin harness w/ (+/-)P/L, Ground, and Siren<br>		*New 4-pin harness w/ (+/-)P/L, Ground, and Siren<br>
	*New 12-pin harness with 22AWG wires for all inputs and low current outputs<br>		*New 12-pin harness with 22AWG wires for all inputs and low current outputs<br>
	*New 6-pin harness with 18AWG wires for Horn/Light flash relays ~~input~~/outputs<br>		*New 6-pin harness with 18AWG wires for Horn/Light flash relays Com/NO/NC wires<br>
	*New antenna port is ~~not~~ 4-pin iData connector on side of module<br>		*New 6-pin harness with 22AWG wires for (-) remote start outputs<br>
	*Door lock port, Green & Black data ~~ports, Red & Blue RS output~~ ports, and Blade connector are all carryover from 70-series<br>		*New antenna port is now White 4-pin iData style connector on side of module<br>
			*Door lock port, Green & Black data ports, and Blade connector are all carryover from 70-series<br>
	*Linkr-MBT can can connect to antenna port and support all functions including antenna as passthrough. This will allow firmware update with no concern about Blade issues. Black port will also support Linkr-MBT.<br>		*Linkr-MBT can can connect to antenna port and support all functions including antenna as passthrough. This will allow firmware update with no concern about Blade issues. Black port will also support Linkr-MBT.<br>

	=New 80 Series Firmware=		=New 80 Series Firmware=
	V1.0 Initial release 8/5-2025<br>		V1.0 Initial release 8/5-2025<br>