CrimeStopper - Revision history

Shawn: /* RSx-G5 Known Issues and Workarounds */

2024-07-02T18:49:33Z

RSx-G5 Known Issues and Workarounds

← Older revision		Revision as of 14:49, 2 July 2024
Line 3:		Line 3:
	:'''Workaround''' - Press unlock twice then press and hold start button till RS shuts down.<br>		:'''Workaround''' - Press unlock twice then press and hold start button till RS shuts down.<br>
	RS range less then 10 feet, Lock/Unlock range is normal.<br>		RS range less then 10 feet, Lock/Unlock range is normal.<br>
	:'''Antenna Firmware''' - Antennas with date code 2219 were found to have bad/no firmware. Field options are set to 2 pulse for RS or replace antenna with diffent date code. REPL was printed on antennas used to replace antennas for customers. A silver dot was placed on antennas that tested good or had firmware updated.<br>		:'''Antenna Firmware''' - Antennas with date code "2219" were found to have bad/no firmware. Field options are set to 2 pulse for RS or replace antenna with diffent date code. REPL was printed on antennas used to replace antennas for customers. A silver dot was placed on antennas that tested good or had firmware updated.<br>

	=RSx-G6 Operations=		=RSx-G6 Operations=

Shawn: /* RSx-G5 Known Issues and Workarounds */

2024-07-02T18:47:02Z

RSx-G5 Known Issues and Workarounds

← Older revision		Revision as of 14:47, 2 July 2024
Line 1:		Line 1:
	=RSx-G5 Known Issues and Workarounds=		=RSx-G5 Known Issues and Workarounds=
	During RS if the unit is put into panic mode it will not shut down via brake or timeout.<br />		During RS if the unit is put into panic mode it will not shut down via brake or timeout.<br />
	:'''Workaround''' - Press unlock twice then press and hold start button till RS shuts down.		:'''Workaround''' - Press unlock twice then press and hold start button till RS shuts down.<br>
			RS range less then 10 feet, Lock/Unlock range is normal.<br>
			:'''Antenna Firmware''' - Antennas with date code 2219 were found to have bad/no firmware. Field options are set to 2 pulse for RS or replace antenna with diffent date code. REPL was printed on antennas used to replace antennas for customers. A silver dot was placed on antennas that tested good or had firmware updated.<br>

	=RSx-G6 Operations=		=RSx-G6 Operations=

Shawn: /* RSx-G6 Operations */

2023-01-20T16:51:26Z

RSx-G6 Operations

← Older revision		Revision as of 12:51, 20 January 2023
Line 8:		Line 8:
	Activate RS (via remote, 3x lock, or data).<br/>		Activate RS (via remote, 3x lock, or data).<br/>
	System will run for time programmed in Feature #14.<br/>		System will run for time programmed in Feature #14.<br/>
			'''Pit Stop'''<br/>
			Use remote as programmed by feature #16 OR press valet twice (same as Excal).<br/>
			Note: Pit Stop only operates once per key cycle.<br/>

	=RSx-G6=		=RSx-G6=

Shawn: /* RSx-G6 Operations */

2022-04-01T14:45:45Z

RSx-G6 Operations

← Older revision		Revision as of 10:45, 1 April 2022
Line 4:		Line 4:

	=RSx-G6 Operations=		=RSx-G6 Operations=
	Turbo Timer		'''Turbo Timer'''<br/>
	Press and hold Brake.		Press and hold Brake.<br/>
	Activate RS (via remote, 3x lock, or data).		Activate RS (via remote, 3x lock, or data).<br/>
	System will run for time programmed in Feature #14.		System will run for time programmed in Feature #14.<br/>

	=RSx-G6=		=RSx-G6=

Shawn: /* RSx-G6 Operations */

2022-04-01T14:45:13Z

RSx-G6 Operations

← Older revision		Revision as of 10:45, 1 April 2022
Line 4:		Line 4:

	=RSx-G6 Operations=		=RSx-G6 Operations=
			Turbo Timer
			Press and hold Brake.
			Activate RS (via remote, 3x lock, or data).
			System will run for time programmed in Feature #14.

	=RSx-G6=		=RSx-G6=

Shawn: /* RSx-G5 Known Issues and Workarounds */

2022-04-01T14:43:35Z

RSx-G5 Known Issues and Workarounds

← Older revision		Revision as of 10:43, 1 April 2022
Line 2:		Line 2:
	During RS if the unit is put into panic mode it will not shut down via brake or timeout.<br />		During RS if the unit is put into panic mode it will not shut down via brake or timeout.<br />
	:'''Workaround''' - Press unlock twice then press and hold start button till RS shuts down.		:'''Workaround''' - Press unlock twice then press and hold start button till RS shuts down.

			=RSx-G6 Operations=

	=RSx-G6=		=RSx-G6=
	New product based on X70 platform with the same antenna and remote compatibility. Initial release will only be the RS1-G6 (2x One Button remotes) and the RS4-G6 (2x Four Button remotes). Same pin-out as X70 with Crimestopper wire colors (directly compatible with Excalibur T-Harnesses).<br />		New product based on X70 platform with the same antenna and remote compatibility. Initial release will only be the RS1-G6 (2x One Button remotes) and the RS4-G6 (2x Four Button remotes). Same pin-out as X70 with Crimestopper wire colors (directly compatible with Excalibur T-Harnesses).<br />

Shawn: /* RSx-G6 */

2020-08-14T20:30:22Z

RSx-G6

← Older revision		Revision as of 16:30, 14 August 2020
Line 23:		Line 23:
	Yellow - (-) Horn Output<br />		Yellow - (-) Horn Output<br />
	Violet - (+) Brake Pedal<br />		Violet - (+) Brake Pedal<br />
	White - (+) ~~ight~~ Flash<br />		White - (+) Light Flash<br />
	'''Red 3-Pin Door Lock Connector'''<br />		'''Red 3-Pin Door Lock Connector'''<br />
	Same as x70<br />		Same as x70<br />

Shawn: /* RSx-G6 */

2020-08-14T20:30:04Z

RSx-G6

← Older revision		Revision as of 16:30, 14 August 2020
Line 11:		Line 11:
	Pink - Ignition (Prog. via V/L)<br />		Pink - Ignition (Prog. via V/L)<br />
	'''White 14-Pin Main Connector'''<br />		'''White 14-Pin Main Connector'''<br />
	Yellow/Black - (-)Status/GWR (Prog. Feature 10)<br />		Yellow/Black - (-) Status/GWR (Prog. Feature 10)<br />
	White/Black - (-)Light Flash<br />		White/Black - (-) Light Flash<br />
	Brown - (-)Trunk Release (Prog. Feature 20)<br />		Brown - (-) Trunk Release (Prog. Feature 20)<br />
	Orange/Black - (-)OEM Disarm (Prog. Feature 13)<br />		Orange/Black - (-) OEM Disarm (Prog. Feature 13)<br />
	Gray - (-)Hood Trigger<br />		Gray - (-) Hood Trigger<br />
	Red/White - Tach Signal<br />		Red/White - Tach Signal<br />
	Pink - (-)Glow Plug(Diesel)/Door Trigger(MT mode)<br />		Pink - (-) Glow Plug(Diesel)/Door Trigger(MT mode)<br />
	Green - (-)RS Activation(Automatic)/Parking Brake(MT Mode)<br />		Green - (-) RS Activation(Automatic)/Parking Brake(MT Mode)<br />
	Orange - OEM Arm (Prog. Feature 13)<br />		Orange - OEM Arm (Prog. Feature 13)<br />
	Black - Chassis Ground<br />		Black - Chassis Ground<br />
	Yellow - (-)Horn Output<br />		Yellow - (-) Horn Output<br />
	Violet - (+)Brake Pedal<br />		Violet - (+) Brake Pedal<br />
	White - (+)~~Light~~ Flash<br />		White - (+) ight Flash<br />
	'''Red 3-Pin Door Lock Connector'''<br />		'''Red 3-Pin Door Lock Connector'''<br />
	Same as x70<br />		Same as x70<br />
Line 29:		Line 29:
	Orange/White - (-) Status (Prog. Feature 11)<br />		Orange/White - (-) Status (Prog. Feature 11)<br />
	Red - (+)12V Low Current<br />		Red - (+)12V Low Current<br />
	Blue/Orange - (-)Start (Prog. Feature 12)<br />		Blue/Orange - (-) Start (Prog. Feature 12)<br />

	=G6 Programming=		=G6 Programming=

Shawn: /* Programming */

2020-08-14T20:26:06Z

Programming

← Older revision		Revision as of 16:26, 14 August 2020
Line 31:		Line 31:
	Blue/Orange - (-)Start (Prog. Feature 12)<br />		Blue/Orange - (-)Start (Prog. Feature 12)<br />

	==Programming==		=G6 Programming=
	'''Vehicle Learn''' - New for Crimestopper.<br />		'''Vehicle Learn''' - New for Crimestopper.<br />
	1. Turn the ignition "On" (do not start)<br />		1. Turn the ignition "On" (do not start)<br />

Shawn: /* Programming */

2020-08-14T20:17:28Z

Programming

← Older revision		Revision as of 16:17, 14 August 2020
Line 63:		Line 63:
	6. Turn the ignition "Off".<br />		6. Turn the ignition "Off".<br />

	'''Feature Reset'''		'''Feature Reset'''<br>
	1. Enter feature programming (DO NOT SELECT ANY FEATURES).<br />		1. Enter feature programming (DO NOT SELECT ANY FEATURES).<br />
	2a. Press LOCK + UNLOCK (or press BRAKE x 5)<br />		2a. Press LOCK + UNLOCK (or press BRAKE x 5)<br />
	2b. 1-button/2-button models: Press the START button 5 times<br />		2b. 1-button/2-button models: Press the START button 5 times<br />
	:- You will get 5 light flashes to indicate reset & exit programming.<br />		:- You will get 5 light flashes to indicate reset & exit programming.<br />