80-series: Difference between revisions
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
=New 80 Series Features= | =New 80 Series Features= | ||
'''Programmable Feature Structure'''<br> | '''New Programmable Feature Structure'''<br> | ||
Features are now broken into 6 Banks <br> | Features are now broken into 6 Banks <br> | ||
'''1. RS Options''' <br> | '''1. RS Options''' <br> | ||
Revision as of 14:47, 10 June 2025
New 80 Series Features
New Programmable Feature Structure
Features are now broken into 6 Banks
1. RS Options
2. Convenience Options
3. Security Options
4. System Behaviors
5. Output Config
6. Input Config
Enter programming with Ignition On/Off and valet 5x
- System will confirm, with 2 chirps
- Ignition back On IF brake requires ignition On for operation
Use prog button to select desired feature bank
- System will respond with chirps to correspond to selected bank number
- Chirps will repeat after ~2 seconds delay
Press brake to confirm selection
- System will respond with 1x chirp
Use prog button to select desired feature
- System will respond with chirps to correspond to selected feature number
- Chirps will repeat after ~2 seconds delay
Press brake to confirm selection
- System will respond with chirps to indicate current option setting of selected feature
Use prog button to select desired option within feature
- System will respond with chirps to correspond to selected option
Press brake to confirm selection
- System will respond with 1x chirp and return to feature selection in current bank
- Pressing Brake again will go back to the bank selection option
Feature Reset - Turn the ignition "on" then "off", immediately press the valet button 5 times. After long siren chirp/horn honk press and hold the Brake Pedal for >2 seconds. The system will chirp once and exit programming with all features set to OEM defaults.