OL-RF-XX-SST: Difference between revisions
| Line 1: | Line 1: | ||
=Overview= | =Overview= | ||
RF antenna using the ADS partner protocol<br> | RF antenna using the ADS partner protocol<br> | ||
'''1.''' Remote data is shared between the RS module and the antenna so remotes MUST be programed upon installation.<br> | '''1.''' Remote programming is COMPLETELY determined by the Data Start product used. Look at Data Start guide for programming process<br> | ||
''' | '''2.''' Remote data is shared between the RS module and the antenna so remotes MUST be programed upon installation.<br> | ||
''' | '''3.''' Remote can NOT be pre-programmed at the time of production. (see note '''1.''')<br> | ||
'''4.''' Some features (Passive Lock, Programmable RS activation, LED flashes, etc..) of the other Omega RF kits are not available<br> | |||
Button operation is slightly different then other Omega product.<br> | Button operation is slightly different then other Omega product.<br> | ||
:Signal is transmitted upon button release. The most noticeable difference is RS activation, two quick presses will activate RS. It is recommended that dealer/installer operate the RS a few times before demo to get familiar with the operation.<br> | :Signal is transmitted upon button release. The most noticeable difference is RS activation, two quick presses will activate RS. It is recommended that dealer/installer operate the RS a few times before demo to get familiar with the operation.<br> | ||
Firmware | Firmware update-able via weblink<br> | ||
=Firmware Versions= | =Firmware Versions= | ||
Revision as of 10:05, 4 November 2020
Overview
RF antenna using the ADS partner protocol
1. Remote programming is COMPLETELY determined by the Data Start product used. Look at Data Start guide for programming process
2. Remote data is shared between the RS module and the antenna so remotes MUST be programed upon installation.
3. Remote can NOT be pre-programmed at the time of production. (see note 1.)
4. Some features (Passive Lock, Programmable RS activation, LED flashes, etc..) of the other Omega RF kits are not available
Button operation is slightly different then other Omega product.
- Signal is transmitted upon button release. The most noticeable difference is RS activation, two quick presses will activate RS. It is recommended that dealer/installer operate the RS a few times before demo to get familiar with the operation.
Firmware update-able via weblink
Firmware Versions
Production Version - V1.02
Update Version - V1.03
- Correct data bits to display firmware version correctly.
Alternative TX Programming
With ADS hardware
Ignition and antenna button(Listed in guide)
1. Ignition ON press and release antenna button
2. Hold antenna button
3. Led in antenna will turn ON
4. Press lock on each remote to learn
5. Release antenna button
Ignition 5x:
1. Ignition OFF-ON 5 times (5th time you need to stay on ignition)
2. Press lock on each remote to learn (5 sec to press lock between each lock)
3. Turn OFF ignition
Note: Unit will most likely end up in valet mode. You will need to cycle the ignition 5x to get out of valet mode
Ignition and Brake
1. Ignition ON/OFF/ON, leave in the ON position
2. Press and release brake 3 times
3. Press lock on each remote to learn (5 sec to press lock between each lock)
4. Turn ignition OFF