Linkr-MBT

1 - Linkr Activation & Troubleshooting

1.1 - Initial Test Activation

1.

a.

2.
#top

1.2 - User

1.
2.
#top ==1.3 - #top To be added
#top

2 - Linkr Admin

2.1 - Dashboard

1. Displays Stats

a. System totals for each category

2.2 - Devices

1. Lists all devices registered in the system

a. UUID - Device serial number based off of Bluetooth ID number

b. Owner - Email address of registered owner, if one exists

c. Authorized User - Email address of any used authorized by the owner to use the device

d. Device Status - Shows current status (enabled/Disabled) of device. Gives admin ability to Disable/Transfer/Replace devices

2. Click on UUID field to get further details on device status and settings

a. Click any field (BLE Firmware/RS Product/RS Firmware/Owner/Auth User) to go to Firmware/Product/User page

b. Check box to enable/disable AUX functions. You must save after selecting and user MUST back out to home screen for settings to take effect

c. Click Disable/Enable, Save, Transfer, Replace, or Add Auth User to do the listed function.

d. Scroll thru features to see last known RS configuration. (Blue = Default / Red = Current selected option if not Default)

3. Click on Owner or Authorized User field to go to user settings (See 2.3 Users)
4. Click on Device enabled/disabled button to go to device settings (See 2)
5. Click on Disable button to disable device
6. Click on Transfer button to transfer the device to another registered user.

a. User must already be registered in the system before transfer is possible.

7. Click on Replace button to replace the old device with a different one.

a. Be sure the device you select is not already registered to another user.

2.3 - Users

1.

2.4 - Brands

1.

2.5 - Products

1.

2.6 - Firmware

1.

2.7 - Device Labelling

1. Used for production labeling. No support functions here (keep out)

2.2 - About

1.