OL-RF-XX-SST: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
=Overview= | =Overview= | ||
RF antenna using the ADS partner protocol<br> | RF antenna using the ADS partner protocol<br> | ||
:1. Remote data is shared between the RS module and the antenna so remotes MUST be programed upon installation.<br> | :'''1.''' Remote data is shared between the RS module and the antenna so remotes MUST be programed upon installation.<br> | ||
:2. Remote can NOT be preprogrammed at the time of production.<br> | :'''2.''' Remote can NOT be preprogrammed at the time of production.<br> | ||
:3. Some features (Passive Lock, Programmable RS activation, LED flashes, etc..) of the other Omega RF kits are not available<br> | :'''3.''' Some features (Passive Lock, Programmable RS activation, LED flashes, etc..) of the other Omega RF kits are not available<br> | ||
Button operation is slightly different then other Omega product.<br> | Button operation is slightly different then other Omega product.<br> | ||
:Signal is transmitted upon button release. The most noticeable difference is RS activation, two quick presses will activate RS. It is recommended that dealer/installer operate the RS a few times before demo to get familiar with the operation.<br> | :Signal is transmitted upon button release. The most noticeable difference is RS activation, two quick presses will activate RS. It is recommended that dealer/installer operate the RS a few times before demo to get familiar with the operation.<br> | ||
| Line 16: | Line 16: | ||
<u>With ADS hardware</u><br> | <u>With ADS hardware</u><br> | ||
Ignition and antenna button(Listed in guide)<br> | Ignition and antenna button(Listed in guide)<br> | ||
1. Ignition ON press and release antenna button<br> | '''1.''' Ignition ON press and release antenna button<br> | ||
2. Hold antenna button<br> | '''2.''' Hold antenna button<br> | ||
3. Led in antenna will turn ON<br> | '''3.''' Led in antenna will turn ON<br> | ||
4. Press lock on each remote to learn<br> | '''4.''' Press lock on each remote to learn<br> | ||
5. Release antenna button<br> | '''5.''' Release antenna button<br> | ||
Ignition 5x:<br> | Ignition 5x:<br> | ||
1. Ignition OFF-ON 5 times (5th time you need to stay on ignition)<br> | '''1.''' Ignition OFF-ON 5 times (5th time you need to stay on ignition)<br> | ||
2. Press lock on each remote to learn (5 sec to press lock between each lock)<br> | '''2.''' Press lock on each remote to learn (5 sec to press lock between each lock)<br> | ||
3. Turn OFF ignition<br> | '''3.''' Turn OFF ignition<br> | ||
'''Note:''' Unit will most likely end up in valet mode. You will need to cycle the ignition 5x to get out of valet mode<br> | '''Note:''' Unit will most likely end up in valet mode. You will need to cycle the ignition 5x to get out of valet mode<br> | ||
Ignition and Brake<br> | Ignition and Brake<br> | ||
1. Ignition ON/OFF/ON, leave in the ON position<br> | '''1.''' Ignition ON/OFF/ON, leave in the ON position<br> | ||
2. Press and release brake 3 times<br> | '''2.''' Press and release brake 3 times<br> | ||
3. Press lock on each remote to learn (5 sec to press lock between each lock)<br> | '''3.''' Press lock on each remote to learn (5 sec to press lock between each lock)<br> | ||
4. Turn ignition OFF<br> | '''4.''' Turn ignition OFF<br> | ||
Revision as of 10:05, 6 January 2020
Overview
RF antenna using the ADS partner protocol
- 1. Remote data is shared between the RS module and the antenna so remotes MUST be programed upon installation.
- 2. Remote can NOT be preprogrammed at the time of production.
- 3. Some features (Passive Lock, Programmable RS activation, LED flashes, etc..) of the other Omega RF kits are not available
Button operation is slightly different then other Omega product.
- Signal is transmitted upon button release. The most noticeable difference is RS activation, two quick presses will activate RS. It is recommended that dealer/installer operate the RS a few times before demo to get familiar with the operation.
Firmware updateable via weblink
Firmware Versions
Production Version - V1.02
Update Version - V1.03
- Correct data bits to display firmware version correctly.
Alternative TX Programming
With ADS hardware
Ignition and antenna button(Listed in guide)
1. Ignition ON press and release antenna button
2. Hold antenna button
3. Led in antenna will turn ON
4. Press lock on each remote to learn
5. Release antenna button
Ignition 5x:
1. Ignition OFF-ON 5 times (5th time you need to stay on ignition)
2. Press lock on each remote to learn (5 sec to press lock between each lock)
3. Turn OFF ignition
Note: Unit will most likely end up in valet mode. You will need to cycle the ignition 5x to get out of valet mode
Ignition and Brake
1. Ignition ON/OFF/ON, leave in the ON position
2. Press and release brake 3 times
3. Press lock on each remote to learn (5 sec to press lock between each lock)
4. Turn ignition OFF