80-series

New 80 Series Features

New Programmable Feature Structure
Features are now broken into 6 Banks
1. RS Options
2. Convenience Options
3. Security Options
4. System Behaviors
5. Output Config
6. Input Config
Enter programming with Ignition On/Off and valet 5x

System will confirm, with 2 chirps

Ignition back On IF brake requires ignition On for operation

Use prog button to select desired feature bank

System will respond with chirps to correspond to selected bank number

Chirps will repeat after ~2 seconds delay

Press brake to confirm selection

System will respond with 1x chirp

Use prog button to select desired feature

System will respond with chirps to correspond to selected feature number

Chirps will repeat after ~2 seconds delay

Press brake to confirm selection

System will respond with chirps to indicate current option setting of selected feature

Use prog button to select desired option within feature

System will respond with chirps to correspond to selected option

Press brake to confirm selection

System will respond with 1x chirp and return to feature selection in current bank

Pressing Brake again will go back to the bank selection option

Feature Reset - Turn the ignition "on" then "off", immediately press the valet button 5 times. After long siren chirp/horn honk press and hold the Brake Pedal for >2 seconds. The system will chirp once and exit programming with all features set to OEM defaults.

New 80 Series Hardware

Non-blade control module (AL-80 / RS-80)
"Same 6-pin main harness pinout as 70-seroes with adjusted wire gauges

Red/White is now Red/Black

Includes single analog sensor port and door triggers in sub harness

Blade control Module (AL-80-B / RS-80-B)