OL-RF-XX-SST

From Omega Wiki
Revision as of 15:27, 5 February 2020 by Shawn (talk | contribs) (Protected "OL-RF-XX-SST" ([Edit=Allow only autoconfirmed users] (indefinite) [Move=Allow only autoconfirmed users] (indefinite)))
Jump to navigation Jump to search

Overview

RF antenna using the ADS partner protocol

1. Remote data is shared between the RS module and the antenna so remotes MUST be programed upon installation.
2. Remote can NOT be preprogrammed at the time of production.
3. Some features (Passive Lock, Programmable RS activation, LED flashes, etc..) of the other Omega RF kits are not available

Button operation is slightly different then other Omega product.

Signal is transmitted upon button release. The most noticeable difference is RS activation, two quick presses will activate RS. It is recommended that dealer/installer operate the RS a few times before demo to get familiar with the operation.

Firmware updateable via weblink

Firmware Versions

Production Version - V1.02
Update Version - V1.03

Correct data bits to display firmware version correctly.

Alternative TX Programming

With ADS hardware
Ignition and antenna button(Listed in guide)
1. Ignition ON press and release antenna button
2. Hold antenna button
3. Led in antenna will turn ON
4. Press lock on each remote to learn
5. Release antenna button

Ignition 5x:
1. Ignition OFF-ON 5 times (5th time you need to stay on ignition)
2. Press lock on each remote to learn (5 sec to press lock between each lock)
3. Turn OFF ignition
Note: Unit will most likely end up in valet mode. You will need to cycle the ignition 5x to get out of valet mode

Ignition and Brake
1. Ignition ON/OFF/ON, leave in the ON position
2. Press and release brake 3 times
3. Press lock on each remote to learn (5 sec to press lock between each lock)
4. Turn ignition OFF

Retrieved from "http://wiki.omegadealer.com/index.php?title=OL-RF-XX-SST&oldid=48"