Linkr-MBT
1 - Linkr Activation & Troubleshooting
1.1 - Initial Test Activation
1.
- a.
2.
#top
1.2 - User
1.
2.
#top
==1.3 -
#top
To be added
#top
2 - Linkr Admin
2.1 - Dashboard
1. Displays Stats
- a. System totals for each category
2.2 - Devices
1. Lists all devices registered in the system
- a. UUID - Device serial number based off of Bluetooth ID number
- b. Owner - Email address of registered owner, if one exists
- c. Authorized User - Email address of any used authorized by the owner to use the device
- d. Device Status - Shows current status (enabled/Disabled) of device. Gives admin ability to Disable/Transfer/Replace devices
2. Click on UUID field to get further details on device status and settings
- a. Click any field (BLE Firmware/RS Product/RS Firmware/Owner/Auth User) to go to Firmware/Product/User page
- b. Check box to enable/disable AUX functions. You must save after selecting and user MUST back out to home screen for settings to take effect
- c. Click Disable/Enable, Save, Transfer, Replace, or Add Auth User to do the listed function.
- d. Scroll thru features to see last known RS configuration. (Blue = Default / Red = Current selected option if not Default)
3. Click on Owner or Autherized User field to go to user settings (See 2.3 Users)
2.3 - Users
1.
2.4 - Brands
1.
2.5 - Products
1.
2.6 - Firmware
1.
2.7 - Device Labelling
1. Used for production labeling. No support functions here (keep out)
2.2 - About
1.